Home
Smart Living
Sense, monitor & control
Long Distance Sensor
IoTPortal
Sense, Monitor & Control
Deploy IoT Solutions without Programming knowledge
Introducing BRT Systems Pte Ltd solution to meet your IoT needs. Based on a proprietary wired LDS protocol, the IoTPortal extends the features of a IoT monitoring system free from the issues faced by wireless networks apt for applications such as urban farming, industrial monitoring and data centres etc.
Product and Accessories
The LDSBus Quad T-Junction connects LDSBus Devices (Sensors/Actuators) to the LDSBus. It serves as a data and power interface between the LDSBus host and the LDSBus devices. Each
LDSBus Quad...
The IoTPortal Gateway allows a wide variety of LDSBus protocol based LDSBus Devices (sensors/actuators) to communicate with BRTSys IoTPortal Cloud services without the need for a PC. Real time monitoring,...
LDSBus CO2 Sensor is a true CO2 sensor that features four sensors in a compact, low-profile design. It includes sensors to measure CO2, temperature, humidity and ambient light. The device...
The LDSBus 4in1 Sensor consists of 4 sensors in a compact low-profile design. Temperature, humidity, Passive Infra-Red (PIR) based motion detection and ambient light measurement sensors are incorporated in this...
The LDSBus Salinity Sensor Adapter is designed to work with a Salinity probe to form a complete Salinity sensor. It uses electrical conductivity method for its measurement. This adapter has...
The LDSBus ORP (Oxidation Reduction Potential) Sensor Adapter is designed to work with a matching ORP probe to form a complete ORP sensor. This adapter has a BNC connector for...
The LDSBus Dissolved Oxygen (DO) Sensor Adapter is designed to work with an analog galvanic probe to form a complete DO sensor. A BNC connector is built into the adapter...
The LDSBus EC (Electrical Conductivity) Sensor Adapter is designed to work with EC probes to form a complete EC sensor. The adapter consists of built-in BNC connector used to attach...
The LDSBus USB Adapter is an integral tool of the LDSBus and issued with the LDSBus Configuration Utility and LDSBus Python SDK.
It is used to:
a. Configure LDSBus Devices (Device...
The LDSBus Thermocouple Sensor Adapter is designed to operate with any K-type thermocouple probe and provides temperature measurements ranging between -200oC to 1372oC with an accuracy of ±0.5oC.
It automatically handles...
The LDSBus pH Sensor Adapter is designed to work with pH probes to form a complete pH sensor. The adapter consists of a built-in BNC connector used to attach pH...
Designed to operate with access cards, the LDSBus RFID Reader uses RFID technology. This RFID Reader can be programmed for either high frequency (13.56Mhz) or low frequency (125Hz) or dual...
Software
With IoTPortal solutions, you can address these issues:
- No programming is required
- Easy to implement
Coming Soon!
