0

  • No products in enquiry cart.

Controllers

aaaaaa

Specification
Documents
Related Solutions

IDM2040-7A

Sku: IDM2040-7A

Sku:

The IDM2040-7A is an intelligent display module featuring a 7″ 800×480 capacitive touch panel. The module carries the latest generation EVE4 controller BT817 supported by a low-cost high performance RP2040 microcontroller.

The on-board RS485 transceiver allows communication with Long Distance Sensor Bus (LDSBus) devices or DMX512 devices through Cat 5/6 cables over an RJ45 connector. The input power supply can be either a Type-C PD charger or a PSU via the DC-jack.

The Type-C PD port is controlled by FTDI’s latest PD controller FT232HP, with PD sink profile programmable through the FTDI utility FT_PROG.

USD 115.00

Quantity:

Specification

Specification Details
Platform
  • Microcontroller – RP2040 (Dual ARM Cortex-M0+)
  • Graphic Controller – BT817
Display
  • Display Size – 7 inches
  • Active Display Area – 154.0 (H) x 85.92 (V) mm
  • Display Type – TFT active matrix
  • Pixel pitch – 0.135mm(H) * 0.135mm(V)
  • Touch/Glass – Projected Capacitive, 5 points multi-touch
  • Contrast – 800:1
  • Number of Pixels – 800(RGB) x 480
  • Backlight – 3 x 9 white LEDs
Features
  • BT817 latest generation EVE controller.
  • RP2040 MCU with 8 MB on-board flash memory programmable with Circuit Python (libraries provided).
  • BRT LDSBus connectivity to a wide range of long distance sensors and actuators (libraries provided).
  • FT232HP: high speed USB connectivity with embedded USB PD support.
  • USB type C connectivity throughout for connection reliability.
  • DMX512 supported for lighting control displays.
Power
  • Input Voltage – DC 24V
  • Input power supply can be either a Type-C PD charger or a PSU via the DC-jack
I/O Ports
  • RJ45 connector for controlling LDSBus or DMX512 devices.
  • Type-C port for FT232HP USB serial converter.
  • DC-jack for up to 24V PSU.
  • 2x Stemma QT (QWIIC) I2C peripheral sockets.
  • Type-C port for RP2040 USB DFU or debug.
  • Type-C port for USB PD charger up to 20V.
  • Micro-SD card socket.
  • SPI pin headers for Adafruit Wi-Fi module or other peripherals.
Physical Characteristics
  • Display Dimensions – 165mm X 100mm
  • PCB Dimensions – 125mm x 55mm
Environmental Limits
  • Operating Temperature – 0 to 70 degrees Celsius
  • Storage Temperature – 0 to 60 degrees Celsius
Package Contents
  • 1 x Printed Circuit Board (PCB)
  • 1 x 7” Display and PCB

Documents

Datasheet
DS_IDM2040-7A Release Date: Mar 7, 2022View

BRT Systems Pte Ltd (BRTSys) provides cutting-edge IoT solutions that drive operational excellence and deliver significant cost-value benefits with two families of solutions: IoTPortal and PanL

Our Solutions
Our Products
Partners
About Us
Copyright © 2024 BRT Systems Pte Ltd. All rights reserved.