Products

USB Adapter

The LDSBus USB Adapter is an integral tool of the LDSBus and issued with the LDSBus Configuration Utility and LDSBus Python SDK.

It is used to:
a. Configure LDSBus Devices (Device name, address and termination settings)
b. LDSBus Device firmware update
c. Sensor Calibration
d. Form an LDS bus using the LDSBus Python SDK

It may be used with Microsoft Windows, Ubuntu Linux, Raspberry Pi 3, Raspberry Pi 4 and RPi2040 systems.

Email to sales@brtsys.com OR Enquire Now

Introduction:

The LDSBus USB Adapter is an integral tool of the LDSBus and issued with the LDSBus Configuration Utility and LDSBus Python SDK.

It is used to:
a. Configure LDSBus Devices (Device name, address and termination settings)
b. LDSBus Device firmware update
c. Sensor Calibration
d. Form an LDS bus using the LDSBus Python SDK

It may be used with Microsoft Windows, Ubuntu Linux, Raspberry Pi 3, Raspberry Pi 4 and RPi2040 systems.

LDSBus USB Adapter has the following features:

  • Reversible USB Type-C connector
  • Individually powered LDSU and LDSBus Ports
  • USB powered RJ11/RJ12 LDSU port
  • 24V power jack inlet to power up the LDSBus through the RJ45 LDSBus port (power Adapter provided)
  • Built in LDSBus Termination
  • LED status Indicators for communication status
  • Flush mount and DIN Rail mounting options
  • Operating temperature range : 0oC to +70oC

Features

  • Interface – USB Type C, RS485
  • LED Indicator (RGB) – System Status Indicator
  • Mounting – Flush Mount, DIN Rail Mount

    • Power

  • Input Voltage – USB Power: 5V DC (power LDSU port), Power jack inlet: 24V DC (power RJ45 port)
  • Max Power – 5V DC@2.5W, 24V DC@12W

    • Physical Characteristics

  • Color – White
  • Housing – Polycarbonate
  • Dimensions – L117.6mm x W42.9mm x H29.7mm

    • Environmental Limits

  • Operating Temperature – 0 to 70 degree celsius
  • Storage Temperature – -20 to 85 degree celsius
  • Ambient Relative Humidity – 5 to 95% (non-condensing)

    • Package Contents

  • Device – 1x LDSBus USB Adapter
  • Installation (Optional) – 1x DIN Rail Bracket set
  • USB Cable – 1x USB-C to USB-A 1 meter cable
  • Power Adapter – 1x 24VDC Power Adapter
    • Datasheet
    NumberTitleRevisionLast Updated
    1LDSBus USB Adapter1.115 September 2022
    Quick Start Guide
    NumberTitleRevisionLast Updated
    1LDSBus USB Adapter QSG1.313 June 2023

    To have more information on the software, click here.

    Newsletter








      Do not show this pop up again.