Products

pH Sensor Adapter

The LDSBus pH Sensor Adapter is designed to work with pH probes to form a complete pH sensor. The adapter consists of a built-in BNC connector used to attach pH probes. The adapter and probe are
calibrated using a 2-point calibration algorithm and supports measurement of pH ranging from 0 to 14 pH with a 0.01 pH resolution.

Check on the different types of 3rd Party Compatible Probes it can work with.

Email to sales@brtsys.com OR Enquire Now

Introduction:

The LDSBus pH Sensor Adapter is designed to work with pH probes to form a complete pH sensor. The adapter consists of a built-in BNC connector used to attach pH probes. The adapter and probe are calibrated using a 2-point calibration algorithm and supports measurement of pH ranging from 0 to 14 pH with a 0.01 pH resolution.

The adapter and probe combination is suitable for use in applications such as nutrient tanks, water treatment plants, sewage treatment plants, swimming pools. Real time monitoring, alert notifications and control
automation can be achieved.

LDSBus pH Sensor Adapter has the following features:

  • pH Sensor Adapter to integrate with any pH probe with a BNC connecter
  • Measures pH range of 0 to 14pH with linearized output and 0.01 pH resolution
  • 2 Point calibration guided step-by-step
  • BRTSys LDSBus protocol. Wired data/power transmission through LDSBus HVT-Junction
  • High report rate of 1 report every 5 seconds
  • Low power consumption 5V-108mW
  • Operating temperature range : 0°C to +70°C
  • Flush Mount and DIN Rail Mount options
  • Supported platform application: BRTSys IoTPortal and LDSBus Python SDK

Features

  • Interface – BNC (Connect to pH probe), RS485
  • LED Indicator (RGB) – System Status Indicator
  • Mounting – Flush Mount, DIN Rail Mount

Power

  • Input Voltage – 5V DC Bus Power
  • Typical Power – 5V 108m W
  • Max Power – 218mW

Salinity Sensor Input module

  • Range – 0 – 14pH
  • Resolution – 0.01pH
  • Response Time – < 1 Minute
  • Calibration – 2 Point Calibration

Physical Characteristics

  • Color – White
  • Housing – Polycarbonate
  • Dimensions – L117.6mm x W42.9mm x H29.7mm

Environmental Limits

  • Operating Temperature – 0 to 70 degree celsius
  • Storage Temperature – -20 to 85 degree celsius
  • Ambient Relative Humidity – 5 to 95% (non-condensing)

Package Contents

  • Device – 1x LDSBus pH Sensor Adapter
  • Installation (Optional) – 1x DIN Rail Bracket set
  • Wire Assembly – 1X 5m RJ11 Cable
Datasheet
NumberTitleRevisionLast Updated
1LDSBus pH Sensor Adapter1.311 September 2023
Quick Start Guide
NumberTitleRevisionLast Updated
1Sensors and Actuators QSG1.313 June 2023

To have more information on the software, click here.

Newsletter








    Do not show this pop up again.