Urban Aquaculture

IoTPortal’s monitoring and control features help you to provide an optimal environment for healthy aquatic and plant life in a wide range of Aquaculture applications including:

With IoTPortal, employees can view data from a wide array of sensors and control devices such as pumps and fish feeders via the output actuators, from anywhere via their Smartphones. They can also oversee the farm by viewing a large number of charts on a larger computer screen using our dashboard. The system can also be configured with events allowing it to react automatically, for example to turn on an air pump when the dissolved oxygen gets low.

Features

The system shown uses several of BRTSys sensors to monitor the critical parameters to ensure the health of the aquatic life. The IoTPortal Gateway manages the Long Distance Sensor Bus consisting of up to 80 sensor units and over distances of 200m per bus allowing use in facilities with many different ponds spread over a wide area.

The system allows you to monitor parameters such as:

  • Nutrient level via the EC probe adapter
  • Water temperature via Thermocouple sensor adapter
  • pH level via the pH sensor adapter
  • Dissolved Oxygen level via the DO sensor adapter
  • Water quality and waste product breakdown via the ORP sensor adapter
  • Salinity level via the salinity sensor adapter for saltwater applications
  • Water Level via the IO Controller
  • General environment monitoring (such as CO2 level and motion sensing)

 

It provides manual or automatic control of devices too such as:

  • Control water pumps to control water levels and filtration (2CH Relay actuator)
  • Control air pumps to maintain water quality (2CH Relay actuator)
  • Control fish feeders automatically (2CH Relay actuator)
  • Control Sirens and Warning Lights to indicate to staff that attention is required (2CH Relay actuator)

 

User friendly and intuitive user interface via smartphone app and dashboard (viewed on a computer via browser)

  • Set up and configure the entire system using the app and dashboard without any programming
  • View the system status from anywhere using the smartphone app
  • Use the dashboard on a large monitor to view many charts at once
  • Set up events to automatically respond to measured conditions
  • Receive emails, SMS and push notifications when an exception occurs

Advantages

  • Maintain a healthy environment for aquatic life

Ensure optimal water quality and environment conditions remain within limits. The IoTPortal monitors the farm 24/7 without the need for manual monitoring. Configure the alert system to notify you and your staff when an issue occurs or something requires attention.

 

  • Monitor large aquaculture farms

Each gateway supports three daisy-chained sensor networks, up to 200m long, allowing a large area to be covered. Use more than one gateway for even larger systems.

 

  • Simple Installation

The LDSBus uses convenient RJ45 connectors and CAT5e/6 cabling in a simple daisy chained configuration. The bus provides power to the sensors avoiding the need to have separate power cabling or outlets.

 

  • Easy to use and intuitive

The smartphone app and dashboard are easy to use for all members of staff. Set up different user permissions so that you can specify whether that can view the system or can change settings etc.

 

  • Range of sensors

We have a wide range of sensors for aquaculture applications allowing the entire farm to be monitored via one system with all sensors and actuators working together. Find out more about our range of sensors and actuators below.

Related Products:

IoTPortal Gateway (PSU Ver)

IoTPortal Gateway (POE Ver)

USB Adapter

Quad T-Junction

CO2 Sensor

EC Sensor Adapter

Thermocouple Sensor Adapter

pH Sensor Adapter

DO Sensor Adapter

ORP Sensor Adapter

Salinity Sensor Adapter

IO Controller

2CH Relay

2CH Relay + iSENSE

Back To Top

Car Parking

 

Features

The system shown uses several of BRT Systems’ sensors to monitor the critical parameters within the Car Park System. The IoTPortal Gateway manages the Long Distance Sensor Bus consisting of up to 80 sensor units and over distances of 200m per bus allowing use in Car Parks with multiple parking floors.

The system allows you to monitor parameters such as:

  • Air Quality via the AQS (Air Quality Sensor) adapter
  • Temperature via the 4in1 Sensor
  • Humidity via the 4in1 Sensor
  • Ambient Light via the 4in1 Sensor
  • Motion Sensing via the 4in1 Sensor

It provides manual or automatic control of devices too such as:

  • Control Lights to switch on when motion is sensed (2CH Relay actuator and Motion from 4in1 sensor)
  • Control Lights depending on the ambient sensor reading (2CH Relay actuator and Ambient light from 4in1 sensor)
  • Control Extractor Fans to maintain air quality by removing exhaust fumes (2CH Relay actuator)

Advantages

  • Maintain clean environment

Avoid build-up of harmful gases from car exhaust fumes, extractor fans switch on when the air quality range meets the preset value.

 

  • Monitor Multiple Floors

Monitor sensors on multiple floors within a multi-storey car park building.

 

  • Simple Installation

The LDSBus uses convenient RJ45 connectors and CAT5e/6 cabling in a simple daisy chained configuration. The bus provides power to the sensors avoiding the need to have separate power cabling or outlets.

 

  • Easy to use and intuitive

The smartphone app and dashboard are easy to use for all members of staff. Set up different user permissions so that you can specify whether that can view the system or can change settings etc.

Related Products:

IoTPortal Gateway (PSU Ver)

IoTPortal Gateway (POE Ver)

USB Adapter

Quad T-Junction

4in1 Sensor

Trailing Edge Light Dimmer

2CH Relay

IO Controller

Back To Top

Data Centre

 

Features

The system shown uses several of BRT Systems’ sensors to monitor the critical parameters within a Data Centre. The IoTPortal Gateway manages the Long Distance Sensor Bus consisting of up to 80 sensor units and over distances of 200m per bus allowing use in Data Centres with multiple rooms.

The system allows you to monitor parameters such as:

  • Air Quality via the AQS (Air Quality Sensor) adapter
  • Temperature via the 4in1 Sensor
  • Humidity via the 4in1 Sensor
  • Ambient Light via the 4in1 Sensor
  • Motion Sensing via the 4in1 Sensor

It provides manual or automatic control of devices too such as:

  • Control Lights to switch on when motion is sensed (2CH Relay actuator and Motion from 4in1 sensor)
  • Control Lights depending on the ambient sensor reading (2CH Relay actuator and Ambient light from 4in1 sensor)
  • Control Air Conditioning to maintain steady temperature (2CH Relay actuator and Temperature from 4in1 sensor)

Advantages

  • Maintain accurate temperature levels

A constant temperature is key to keeping a Data Centre running. If the room is too hot it can damage equipment and data could be lost. The system can be set to automatically adjust the air conditioning and also alter any user globally of an issue.

 

  • Monitor Multiple Rooms

Monitor sensors on multiple rooms within the Data Centre.

 

  • Simple Installation

The LDSBus uses convenient RJ45 connectors and CAT5e/6 cabling in a simple daisy chained configuration. The bus provides power to the sensors avoiding the need to have separate power cabling or outlets.

 

  • Easy to use and intuitive

The smartphone app and dashboard are easy to use for all members of staff. Set up different user permissions so that you can specify whether that can view the system or can change settings etc.

Related Products:

IoTPortal Gateway (PSU)

IoTPortal Gateway (POE)

USB Adapter

Quad T-Junction

4in1 Sensor

Trailing Edge Light Dimmer

2CH Relay

IO Controller

Back To Top

Vertical Farming

 

IoTPortal can help achieve more consistent yields and crop quality in a wide range of Agricultural applications. An array of sensors monitor the key parameters in the soil, liquid tanks, and surrounding atmosphere. Monitor the entire farm both locally and remotely, whilst IoTPortal reacts to conditions automatically via the events feature, and notifies you on your smartphone via email, SMS and push notifications should attention be required.

Applications include:

Features

The system allows you to monitor parameters such as:

  • Soil moisture levels via the soil moisture sensor
  • Outdoor Weather conditions via the IO Controller-based Weather Station
  • Nutrient Tank monitoring including:
    • Water temperature via the Thermocouple sensor adapter
    • pH level via the pH sensor adapter
    • EC via the Electrical Conductivity sensor adapter
    • Water Level via the IO Controller
  • General environment monitoring
    • CO2 levels via the CO2 sensor
    • Air Quality via the AQS sensor
    • Air temperature, Humidity, Brightness and Motion via the 4in1 sensor

It provides manual or automatic control of devices too such as:

  • Control water pumps and valves for irrigation (2CH Relay actuator)
  • Control lighting (Trailing Edge Light Dimmer)
  • Control Rain Curtains and Sun Shades (2CH Relay actuator)
  • Control Sirens and Warning Lights (2CH Relay actuator) to indicate to staff that attention is required

The Cloud-based system and Smartphone App/Dashboard make it easy to set up and use:

  • View the status of every parameter from around the farm from anywhere in the world via the Smartphone app
  • Use the dashboard on a large monitor from anywhere in the world (via web browser) to view many charts at the same time
  • Set up automatic events to handle tasks around the farm
    • Turn on irrigation pumps via a 2CH Relay actuator when the soil moisture gets below your set threshold
    • Close the rain curtain via the 2CH Relay actuator when the weather station detects rainfall
    • Turn on grow lighting based on ambient light conditions and the current time
    • Operate ventilation fans or shutters when the temperature gets too high or the air quality drops below a set threshold
  • Receive emails, SMS and push notifications when an exception occurs that requires your attention
    • Receive a text message if the nutrient tank level gets low and the system has not been able to restore the level after opening the valve
    • Receive a push notification if the nutrient tank temperature drops to a value where freezing may occur

Advantages

  • Maintain optimal conditions for the crops, providing consistent yields and quality

The IoTPortal monitors the farm 24/7 to ensure that all key conditions remain within your set limits, reacting automatically via output actuators to take action to maintain the conditions.

 

  • Improve staff utilisation

The system reduces the need for manual monitoring and so frees up staff for other tasks. Configure alerts to be notified even whilst off-site or out-of-hours when the system needs attention.

 

  • Monitor large farms

Create large networks by daisy chaining the sensors using Quad T-Junctions. Each gateway supports three sensor networks, up to 200m long, allowing a large area to be covered. Use more than one gateway for even larger farms and all gateways appear as one large system.

 

  • Simple Installation

The LDSBus uses convenient RJ45 connectors and CAT5e/6 cabling in a simple daisy chained configuration. A single cable provides power and data to all sensors and actuators, avoiding the need for batteries and power outlets around the farm.

 

  • Easy to use and intuitive

The smartphone app and dashboard are easy to use for all members of staff. Set up different user permissions allowing users to view only or to re-configure the system.

 

  • Range of sensors

We have a wide range of sensors for the soil, environment and aquatic parameters allowing the entire farm to be monitored via one unified system. Mix and match sensors and actuators in any combination. Find out more about our range of sensors and actuators below.

Related Products

IoTPortal Gateway (PSU Ver)

IoTPortal Gateway (POE Ver)

USB Adapter

Quad T-Junction

4in1 Sensor

CO2 Sensor

Trailing Edge Light Dimmer

EC Sensor Adapter

Thermocouple Sensor Adapter

pH Sensor Adapter

DO Sensor Adapter

ORP Sensor Adapter

Salinity Sensor Adapter

2CH Relay

Isolated IO Controller

Back To Top